| Model | FRE-700-1SD- Trust EG |
| Capacity | 700 Liter |
| shelves | 4 shelves |
| Door No. | 1 |
| Type.: | Stand Alone with 4 castors with two lock. |
| Description | Solid door |
| Door Sealing system | Doors Sealing system with magnetic gasket |
| Door lock | 1Lock with 1 key |
| Tempering | From ( -20º C to -32º C ) +1ºC |
| Drawer | Not need |
| Interior | Stainless steel(304) |
| Exterior | Stainless steel n(304) |
| Voltage | 220-240 V AC, 50Hz |
| Temperature Control
With color LCD touch screen |
Microprocessor control with software Temperature graph. |
| Alarm System | Audio & Visual and LCD message for high and
Low temp and comp one or two failure and power failure and door open. |
| Failures Alarm | Self diagnostics |
| Temp indicator | LCD touch screen display Temperature graph. |
| Sensor | 4 sensors ( 2 Pt and 2 Ds sensor for monitor and ambient ) |
| temp Record | Digital temp recorded graph. |
| Foam Insulation | High Density CFC (urethane free) |
| Compressor | Slovakia Compressor or Europe compressor ( One COMPRESSOR 1.5 hp ) |
| Refrigerant | R404a/R452a |
| Cooling system | No frost and automatic defrost. |
v Operation :
- Initial Power-Up.:
- Plug the power cord into a grounded outlet that meets the electrical requirements on the product specification
- Turn the AC power switch
- Turn the Back Up battery switch
- TOUCH SETTING ON SCREEN as shown in the figure (1).
- To enter the settings of the device, touch the settings tab and enter the password as shown in the figure (2).
- Choose the operating temperature and separation temperature via the arrows as shown in the figure(3)
- Touches the word save
- Touch the back sign
v Note:¨ Active alarms are displayed on the Home screen. If an alarm condition other than High Temperature occurs, wait to access set point. ¨ After about40 minutes have passed, the unit will reach the required degree that was set in advance, and then the system will draw a graph of the heat and the disappearance of the audio alarms and messages written on the screen as shown in the two figures.
|
The compressors operated interchangeably:
The freezer system alternately operates compressors, and operates the two compressors interchangeably to achieve the desired temperature. In the event of an error or damage to one of the compressors, the system automatically runs the other compressor without affecting the stored product, you can easily adjust this by following the setup steps by specifying the required degree to be achieved, and then the system will automatically overlap.
· Freezing and Defrost System:
- · No frost and automatic defrost.
- Freezer preset to the proc
Voice alerts and messages on the screen:(1) If you press it explain our Company profile. (2) If you press it mute voice or un mute. (3) If you press it setting program. (4) Explain Low or High Temp. (5) Explain Door open or close. (6) Explain Compressor Failure (that’s problem on you compressor check it). |
Reviews
There are no reviews yet.