Drug storage Refrigerator

 Operation:

• Initial Power-Up.:
  • Plug the power cord into a grounded outlet that meets the electrical requirements on the product specification
  • Turn the AC power switch
  • TOUCH SETTING ON SCREEN as shown in the figure (1).
  • To enter the settings of the device, touch the settings tab and enter the password as shown in the figure (2).
  • Choose the operating temperature and separation temperature via the arrows as shown in the figure(3)
  • Touches the word save
  • Touch the back

Note:

• Active alarms are displayed on the Home screen. If an alarm condition other than High Temperature occurs, wait to access set

After about 30 minutes or 45 minutes max in the first start have passed, the unit will reach the required degree that was set in advance, and then the system will draw a graph of the heat and the disappearance of the audio alarms and messages written on the screen as shown in the two figures

• Settings:
  • To operate the refrigerator system, please follow the following
  • 1- Operating the refrigerator system from the designated switch
  • 2- Touch the setting tab to choose the temperature from 0 to 10 °
  • 3- Choose the sound and visual alarm temperature of the
  • 4- Touch the Save Data tab twice, and then touch the Back
  • 5- Restart the refrigerator

• Voice alerts and messages on the screen:

(1)    If you press it mute voice or un mute.

• Mute
• If you press it setting
• Power Failure
• Door is
• Door is
• Compressor is
• compressor is off
• Explain Compressor Failure (that’s problem on you compressor check it ).
• Explain High
• Explain low temp