Operation
:
- Initial Power-Up.:
- Plug the power cord into a grounded outlet that meets the electrical requirements on the product specification
- Turn the AC power switch
- Turn the Back Up battery switch
- TOUCH SETTING ON SCREEN as shown in the figure (1).
- To enter the settings of the device, touch the settings tab and enter the password as shown in the figure (2).
- Choose the operating temperature and separation temperature via the arrows as shown in the figure(3)
- Touches the word save twice
- Touch the back sign.
Note:
- Active alarms are displayed on the Home screen. If an alarm condition other than High Temperature occurs, wait to access set point.
- After about 30 minutes have passed, the unit will reach the required degree that was set in advance, and then the system will draw a graph of the heat and the disappearance of the audio alarms and messages written on the screen as shown in the
- Settings
- To operate the freezer system, please follow the following
- 1- Operating the freezer system from the designated switch.
- 2- Touch the settings tab to choose the temperature from minus five degrees Celsius to minus twenty two degrees Celsius, depending on the choice.
- 3- Select the freezer sound and visual alarm temperature.
- 4- Touch the Save Data tab twice, then touch the Back tab.
· Voice alerts and messages on the screen:
(1) if you press it explain our Company profile.
(2) if you press it mute voice or un mute.
(3) if you press it setting program.
(4) explain Low or High Temp.
(5) explain Door open or close.
(6) explain Compressor Failure (that’s problem on you compressor check it ).
Integrated system:
|
|
||
|
Model |
TR– Trust EG |
|
|
No. of Units |
3 Units |
|
|
The system can connect with three Refrigerators or freezers at one time and analyze the data for three devices at one time while displaying room temperature and comparing it to the temperatures of three refrigerators or freezers at one time , The reciprocal system identifies malfunctions and monitors all parts of the freezing unit, and in the event of a malfunction, it identifies it and introduces the alternative freezing unit, As each freezer or refrigerator has two compressors that work interchangeably, the reciprocal system operates the compressor until it achieves the required degree of freezing or cooling, and then takes it out and inserts the other compressor to also achieve the required degree to make a reserve for each of them for the other, and when a sudden failure occurs in one of the pistons, let it be a compressor (1) The main system of the device determines the malfunction and inserts the compressor (2), then sends the data to the integrated monitoring system, which then sends text messages to those responsible for the device on their mobile phones to alert them that there is a malfunction in the compressor (1).
|
||
|
(A) |
||
|
(B) |
||
|
(C) |
||
|
(D)
(E) |
||
|
(F) |
||
|
(G) |
||
|
(H) |
||
|
(J) |
||
|
(I)
|
||
Note: Please choose the communication system with a good signal in the exact location to operate the system |
||
The data and monitoring can be recalled via the Internet as shown in the following figure:
Reviews
There are no reviews yet.